Cabinet Doors in RTF Finish.

These very high quality doors are solid MDF (medium density fiberboard) and can be ordered raw ready-to-paint or with your choice of several durable, easy to clean RTF (rigid thermofoil) finishes.

	700		701	703	731

Shown in RTF antique white MDF/RTF Doors
	716		Euro100	Euro102
				NEW!	Matching Drawer Fronts

Double Shaker 720	Flat Panel RTF	Shaker - 700sk5 Order edge 115		Beaded Shaker 700-NT
MDF/RTF Door Panel Profiles Euro Profile

K3 - round corner 3 pass* K5 - square corner 5 pass* Profile			I3 - round corner 3 pass* I5 - square corner 5 pass* Profile

BEST VALUE!
*C2 - round corner 2 pass Profile**


* Passes means it can take several passes with the router to produce the selected panel profile, so you pay a little more for the design.
Minimum Dimensions for Doors and Drawer Fronts
Door style - minimum width x minimum height: 700 - 7 1/2 X 7 1/2 701 - 9 X 10 703 - 9 X 12 1/2 716 - 9 X 10 731 - 9 X 12 1/2			Drawer front style - minimum width x minimum height: 400 SLAB - 3 1/2 X 3 1/2 700FS C - 7 1/2 X 5 1/2 700FS I - 7 1/2 X 5 1/2 700FS K - 7 1/2 X 5 1/2 700FS V - 7 1/2 X 6 700SK5 - 7 1/2 X 7 1/2

		More Customer Compliments and Photos!
	Pictures
		Pictures speak louder than words. Here are some pictures of our white kitchen! Thanks, Chuck!

		Overall, we are quite happy with the doors and refacing materials and very pleased with the dramatic difference they are making in the kitchen so far. My husband commented that this is one product that has (rather uncommonly) lived-up to consumer expectations formed by the advertising and marketing material! Thank you! Linda W.

		I ordered 4 cabinet doors, 8 hinges and 4 knobs. (thank you!) I love the doors! Kathy O.

		We just wanted to take a moment to drop you a line and tell you about our kitchen remodeling job. Before we even ordered the material, we watched your video 3 or 4 times to make sure we were comfortable in not getting in over our head. Though my wife and I both harbored some trepidation about the project, we were both willing to tackle it. We thought, "...the video makes it look relatively easy, but is it going to go as well as they say??" Well, you'll be happy to know, the refacing job went very well!! As you can see by our 'Before' and 'After' pictures, the result is beautiful. The first two pictures are 'Before' the last two are 'After' the remodel. My wife just loves the cabinets and everything else in the kitchen. The cabinets really lighten things up. Also, one little trick we did, when we applied the laminate, we left enough excess to wrap it around the interior edges of the cabinets so that the only way you can tell they were refaced is to get real close to the work we had done. Thanks so much for making refacing our cabinets so easy. It took 3 days to do the refacing and 2 days to do the tile. In a week, we had a brand new kitchen. We couldn't have done it without you!!! Thanks again!! Eric and Carol A.

		Kitchen doors arrived yesterday; they are drilled correctly and already installed! Thank you very much for your dedicated commitment to getting the holes drilled RIGHT and I especially appreciate these doors because I had mentioned that it was OK to not drill them. Very happy that you did, not me! If I may be of some assistance to testify about your outstanding customer service or for your potential customers, I will be happy to do so. Best wishes to you and your team! Jim Z.

		In total we saved $1700 and got two additional cabinets over what Lowe�s would have charged use for partial board cabinets. It was $3700 less than the custom installer wanted for our little kitchen. It took me two weekends for the installation one for the base and one for the wall cabinets. My brother did help me for a day and one evening. Two people could have done it all in two or three days of work but I am glad I broke it up into the two weekends. In a couple weeks we tackle the three vanities� Thanks for the great products. Gary N.